From creation to recycling: the life cycle assessment of the ID. models

Every stage of a vehicle’s life causes CO2 to be emitted. The life cycle assessment reveals just how much this is. On the way to carbon neutral mobility for all we have optimised the production process of the ID. models so as to save CO2.

raw materials, an ID.3 and wind energy plants

A car’s lifetime and its environmental effects

The challenge: to enable CO2-optimised production, our experts first have to be able to determine the CO2 emissions as precisely as possible. This is where the life cycle assessment can help. They use this ISO-standardised method to analyse each individual component and ascertain the effect that a vehicle has on the environment over the course of its entire life cycle– from raw material extraction to production, assembly and the usage phase of the vehicle, through to recycling of the materials. Several impact categories are examined. One of these is emissions of CO2 and a small proportion of other gases that are converted into what is known as carbon dioxide equivalents. This unit of measurement makes it possible to compare the effect of all greenhouse gases on the climate.


Making sustainability measurable

At each of a component’s processing stages its emissions are calculated using a special software based on average values. For especially energy-intensive production stages, such as battery cell manufacturing, we use concrete data from the respective suppliers rather than averages values for the ID. models. This procedure is also identified as a specific life cycle assessment. It shows us exactly what impact our implemented measures have – and how much CO2 actually needs to be compensated for. The results of the life cycle assessment are independently verified and certified by TÜV Nord.


TÜV NORD Certificate: Climate-neutral product

Certified as a “climate-neutral product”

Now that we know how high the emissions are during the production of ID. models, we are going one step further. Volkswagen confirms you by letter and seal that your ID. vehicle will be handed over to you in a CO2-neutral way. This is because the independent testing agency TÜV NORD confirms the ID. vehicle as a "climate-neutral product" when handed over to the customer. For this calculation, CO2 equivalents in the entire delivery chain as well as in production and assembly are taken into account. The transport to dealerships in the whole of Europe, the first battery charge before handover and the recycling of the vehicle are also part of this calculation. We compensate for the CO2 equivalents that are calculated. Only those CO2 equivalents that occur during the use and maintenance of the vehicle are not included. The CO2 equivalents from the recycling of the high-voltage battery are also not taken into account as the raw materials that are reconditioned as a result of this process are the basis for the ecological balance of future batteries.

1 Supply chain / 2 Production / 3 Logistics / 4 Initial charging high-voltage battery

1 Supply chain / 2 Production / 3 Logistics / 4 Initial charging high-voltage battery

CO2eq emissions not already avoided, taking into account reduction measures

Driving an ID. offers great advantages

To ensure that you receive a better CO2 footprint than with a comparable combustion engine we are first of all reducing and avoiding CO2 during manufacturing using a variety of measures. These are described in the article “Together for more climate protection”Opens an external link. This includes, for example, using green electricity both during battery cell manufacturing and in our Zwickau plant, where the ID.3 and the ID.4 are built. Unavoidable CO2 emissions from production through to handover to the customer, which are determined using the specific life cycle assessment, are ultimately offset through investions in certified climate protection projects. This is also regularly checked by TÜV NORD.

Comparing various life cycle assessments across the whole life cycle reveal that even without offsetting the remaining CO2 emissions during production, the ID. models have a CO2 advantage over a comparable model with a combustion engine. And this is not only the case when charged using green electricity, but also applies when charged using the conventional European electricity mix*.

Electric mobility also provides the excellent opportunity to reduce CO2 emissions during the usage phase to almost zero, and dramatically enhance this advantage:
by purposely charging with green electricity. Climate protection is in your hands!

* At an estimated service life of 200,000 km compared to the Golf 8.

Potential for the future 

The results of the life cycle assessment for electric vehicles are only a snapshot. They offer much more potential for further reduction of CO2 emissions far beyond the vehicle’s life cycle. First of all, during the usage phase through increasing development of renewable energy sources, and secondly during production. This is why we work closely together with our suppliers to continue reducing remaining CO2 emissions through the use of green electricity and recycled materials, even within the complicated upstream supply chain. That is why we see offsetting through certified climate protection projects as an immediate measure – and one step on our path toward a CO2-neutral future.